Cable winch TESMEC ARS 403 (diesel tensioning device)

Our Company rents out a diesel cable winch Tesmec ARS403 (manufacturer – Italy), operated by an experienced mechanic. We work in all the regions of Belarus – Minsk, Mogilev, Gomel, Brest, Grodno, and Vitebsk.

The winch with adjustable tension to prevent damage is used to lay the high-voltage cable into the prepared track. The kit includes a rope of 1000 m long, rollers, stockings of various diameters, and radio stations. If necessary, we provide the telescopic handler Manitou MLT 845-120LSU for moving cable reels.

Кабельная лебедка Tesmec

The Tesmec cable winch is a system of a diesel engine, a closed hydraulic circuit, and rotating wheels – capstans with a diameter of 325 mm, made of heat-treated steel. The leader cable installed on this winch, passing through capstans and coupling with the wire being laid with the aid of the head clamp (the so-called “stocking”), pulls this wire through the rollers pre-installed on the supports. The hydraulic tensioning winch is designed for laying (pulling) one cable or wire.

The capstans have a pre-warning system of the pulling force, which can automatically adjust the speed depending on the load or friction, and also maintain the pulling force at the set value.

The specification of the cable winch

Maximum pulling force 35 kN
Speed at the maximum pulling force 1.2 km/h
Maximum speed 3.6 km/h
Pulling force at maximum speed 12 kN
Maximum pulling force 35 kN
Speed at the maximum pulling force 1.2 km/h
Maximum speed 3.6 km/h
Diesel engine Lombardini model LDW 1404 FOCS, 25 kW at 3600 rpm with water cooling
Transmission Closed hydraulic circuit with fluid cooling
Bridge rigid type for towing at a maximum speed of 30 km/h
Diesel engine Lombardini model LDW 1404 FOCS, 25 kW at 3600 rpm with water cooling
Electrical voltage 12 V
Nominal diameter of tension drums 325 mm
 

Drum linings

Heat-treated steel
Maximum rope diameter 13 mm
Weight 980 kg
Nominal diameter of tension drums 325 mm
 

Drum linings

Heat-treated steel
Maximum rope diameter 13 mm

NOTE: Specification applies to the basic device when used at sea level and a temperature of 20 °C

Configuration
  • Automatic hydraulic brake of counter-rotation
  • Dynamometer with a control point and automatic control of the maximum tension level
  • Regulators for the hydraulic system and diesel engine
  • Built-in spooler with automatic rope dispenser for standard mode drums BOF010 and BOF020 (AXR001 included)
  • Programming system and control of pulling force
  • Grounding point

Overall dimensions

  • Length with hauling traction and drum spooler – 1800 mm
  • Width – 1450 mm
  • Height – 1600 mm
  • Weight – 900 kg